Arizona Fishing Forums on AZBZ banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,105 Posts
there should be zero lash in the bearing, meaning no play at all they need to be checked to see if they are going bad or starting brindle or pit this will cause play. zero lash then tighten or back off just enough to put cotter pin in. jmho. ase master tech 35yrs.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top